Drain Assembly for Poly Stock Tanks

Necessary to completely drain a plastic stock tank because the drain provided is located on the side rather than the bottom. Our drain assembly is installed directly in the bottom near the outside edge of the tank (preferably on the same side as the heater). The plastic stock tank drain assembly includes a longer drain pipe (required when enclosing the tank with vertical side panels). Drain fixture requires a 2-in. hole to be cut in the bottom of the tank using a hole saw with a drill motor. Note: A plastic stock tank must be elevated at least 4-in. off the ground to provide clearance for the drain pipe. Includes a stainless steel drain fixture, drain pipe, and brass gate valve with a garden hose fitting.